TSX 48 modularsystem (1023120)
The dimming equipment TSX 48/TSX 48 AF is a modern system meeting
the contemporary requirements on lighting technique control and also the
requirements of up-to-date technical standards. Fully digital control unit enables
communication using network protocol with the computer in the central control
room. The utility program TSC diagnostics enables to carry out control unit (units)
setting and to monitor the system diagnostics directly from the control center.
The unit is intended for fi xed installation in theatres, TV studios etc.
Description of the equipment
The whole equipment is installed in the cubicle of the switchboard.
The LE 24×2 control unit and the SVJ 48 unit monitoring power units, protective
circuits, dimmers and fans are installed in the 19" frame. Opening for cable entry
is located on the bottom of the switchboard.
The switchboard cubicle is fitted with a door, which is glassed-in in the whole
height of the 19" frame.
the contemporary requirements on lighting technique control and also the
requirements of up-to-date technical standards. Fully digital control unit enables
communication using network protocol with the computer in the central control
room. The utility program TSC diagnostics enables to carry out control unit (units)
setting and to monitor the system diagnostics directly from the control center.
The unit is intended for fi xed installation in theatres, TV studios etc.
Description of the equipment
The whole equipment is installed in the cubicle of the switchboard.
The LE 24×2 control unit and the SVJ 48 unit monitoring power units, protective
circuits, dimmers and fans are installed in the 19" frame. Opening for cable entry
is located on the bottom of the switchboard.
The switchboard cubicle is fitted with a door, which is glassed-in in the whole
height of the 19" frame.
ID:
1023120
Price
Price (net of VAT) / pcs
The dimming equipment TSX 48/TSX 48 AF is a modern system meeting
the contemporary requirements on lighting technique control and also the
requirements of up-to-date technical standards. Fully digital control unit enables
communication using network protocol with the computer in the central control
room. The utility program TSC diagnostics enables to carry out control unit (units)
setting and to monitor the system diagnostics directly from the control center.
The unit is intended for fi xed installation in theatres, TV studios etc.
Description of the equipment
The whole equipment is installed in the cubicle of the switchboard.
The LE 24×2 control unit and the SVJ 48 unit monitoring power units, protective
circuits, dimmers and fans are installed in the 19" frame. Opening for cable entry
is located on the bottom of the switchboard.
The switchboard cubicle is fitted with a door, which is glassed-in in the whole
height of the 19" frame.
This system makes possible to use any number of switchboard cubicles.
Each control unit has got its IP address, the units are interconnected
by the Ethernet network and for the communication with the PC they
are using TCP/IP protocol. The user receives all data about the whole
system directly from the lighting control console. On the display are
graphically shown eventual error messages (circuit without power
supply, circuit without load) and detailed information about each
circuit. The user can also edit the parameters of the individual dimmers
and the whole system using the touchscreen.
This system makes possible the storing of any of memories and their
subsequent application as preset scenes by the push-button stations.
The dimmer is used for auditorium lighting, for general scene lighting
in multi-functional objects etc.
Features of TSX 48 modularsystem
48× 2,3 kW (24× 5 kW)
ID Nr. 1023120
• Full digital control with LE 24×2 control unit
• 2x digital input DMX 512
(connection to connecting block)
• Ethernet port RJ-45
• 2 analog outputs
• 16 analog inputs
• Possibility of storing of own memories
• Start of the preset scenes by push-button stations.
These push-button stations have got 6 presets and
can be placed in any location in the building.
• Protection with circuit breakers C10 A (2.3 kW)
or C13 A/2 (5 kW).
• Plug-in dimmer modules with passive and active
cooling system.
• Dimming modules for load of 2×2.3 kW and 1× 5 kW
• Switching relay modules for load of 2×2.3 kW
• Signaling indicators IN1, IN2, OUT1, OUT2 on each module.
• Active cooling system with fans and with signaling
of supply failure.
• Communication via Ethernet
Features of the TSX 48
AF modular system dimmer
48× 2,3 kW (24× 5 kW) Ethernet
ID Nr. 1023125
• Equipped with same features as the TSX 48 dimmer.
• Remote system administration via PC.
• Feedback diagnostics with error messages
into central control room.
• Digital layout chart (synoptic layout)
communicating with switchboards (optional)
Le 24×2 control unit features
• Voltage indication of all phases on the display
• Setting the start address for DMX port A and B
• Assignment of any DMX address to any dimmer (PATCH)
• 8 curves of output characteristics
• Setting dimmer preheating (PREHEAT) 0–10%
• Maximal voltage setting of the Dimmer 90–100%
• Setting response time of 30 ms, 100 ms, 300 ms
• Assignment of analog inputs to individual dimmers
• Behaviour setting by signal drop–out–hold last, black
out, fixed value, stored preset
• Diagnostics using Ethernet interface
• Monitoring and setting through PC
• Locking of set values
• Testing mode
• The processor control unit Le 24 is without any
adjustments fully mechanically compatible with some
processors of the Strand Lighting. The refore it may
be used as a spare art by the repairs of the existing
installations of the dimming systems Strand Lighting.
the contemporary requirements on lighting technique control and also the
requirements of up-to-date technical standards. Fully digital control unit enables
communication using network protocol with the computer in the central control
room. The utility program TSC diagnostics enables to carry out control unit (units)
setting and to monitor the system diagnostics directly from the control center.
The unit is intended for fi xed installation in theatres, TV studios etc.
Description of the equipment
The whole equipment is installed in the cubicle of the switchboard.
The LE 24×2 control unit and the SVJ 48 unit monitoring power units, protective
circuits, dimmers and fans are installed in the 19" frame. Opening for cable entry
is located on the bottom of the switchboard.
The switchboard cubicle is fitted with a door, which is glassed-in in the whole
height of the 19" frame.
This system makes possible to use any number of switchboard cubicles.
Each control unit has got its IP address, the units are interconnected
by the Ethernet network and for the communication with the PC they
are using TCP/IP protocol. The user receives all data about the whole
system directly from the lighting control console. On the display are
graphically shown eventual error messages (circuit without power
supply, circuit without load) and detailed information about each
circuit. The user can also edit the parameters of the individual dimmers
and the whole system using the touchscreen.
This system makes possible the storing of any of memories and their
subsequent application as preset scenes by the push-button stations.
The dimmer is used for auditorium lighting, for general scene lighting
in multi-functional objects etc.
Features of TSX 48 modularsystem
48× 2,3 kW (24× 5 kW)
ID Nr. 1023120
• Full digital control with LE 24×2 control unit
• 2x digital input DMX 512
(connection to connecting block)
• Ethernet port RJ-45
• 2 analog outputs
• 16 analog inputs
• Possibility of storing of own memories
• Start of the preset scenes by push-button stations.
These push-button stations have got 6 presets and
can be placed in any location in the building.
• Protection with circuit breakers C10 A (2.3 kW)
or C13 A/2 (5 kW).
• Plug-in dimmer modules with passive and active
cooling system.
• Dimming modules for load of 2×2.3 kW and 1× 5 kW
• Switching relay modules for load of 2×2.3 kW
• Signaling indicators IN1, IN2, OUT1, OUT2 on each module.
• Active cooling system with fans and with signaling
of supply failure.
• Communication via Ethernet
Features of the TSX 48
AF modular system dimmer
48× 2,3 kW (24× 5 kW) Ethernet
ID Nr. 1023125
• Equipped with same features as the TSX 48 dimmer.
• Remote system administration via PC.
• Feedback diagnostics with error messages
into central control room.
• Digital layout chart (synoptic layout)
communicating with switchboards (optional)
Le 24×2 control unit features
• Voltage indication of all phases on the display
• Setting the start address for DMX port A and B
• Assignment of any DMX address to any dimmer (PATCH)
• 8 curves of output characteristics
• Setting dimmer preheating (PREHEAT) 0–10%
• Maximal voltage setting of the Dimmer 90–100%
• Setting response time of 30 ms, 100 ms, 300 ms
• Assignment of analog inputs to individual dimmers
• Behaviour setting by signal drop–out–hold last, black
out, fixed value, stored preset
• Diagnostics using Ethernet interface
• Monitoring and setting through PC
• Locking of set values
• Testing mode
• The processor control unit Le 24 is without any
adjustments fully mechanically compatible with some
processors of the Strand Lighting. The refore it may
be used as a spare art by the repairs of the existing
installations of the dimming systems Strand Lighting.
Producer:
TS Dimmers