
PICKED UP HERE
Komenského 427
Újezd u Brna
664 53
Mon - Fri 8 - 11 a.m., 12 - 15 p.m.

PAYMENT METHODS
bank transfer and cash on delivery.
It is not possible to pay by card!

SHIPPING
in the case of pallet consignments
according to contract
Center arm 250 GOLEM II (0130202)
Center arm with hole length 250 mm.
This element is part of the GOLEM II modular carrier and mounting system.
Total load capacity of 50 kg.
This element is part of the GOLEM II modular carrier and mounting system.
Total load capacity of 50 kg.
ID:
0130202
PRICE
116,00 EUR
net of VAT /
pcs
The Golem II is a modern robust tilt arm system for installation of lighting fixtures on wall and other vertical support structures. The entire system is of a modular design, consisting of several parts that can be combined with each other.
The base arm is used to attach the system to a wall or a vertical pipe of different diameters. It is possible to attach to the base arm a center and then an end arm, as required by the customer, to form a two-arm assembly.
If necessary, the center arm can be omitted and the end arm can by connected directly to the base arm. So a single-arm assembly is produced.
The center and end arm can be selected in two variants:
250 mm or 350 mm long. By combination of these parts, the suspended device can be offset from the vertical structure in the following lengths: 400 mm, 650 mm, 750 mm
and 850 mm.
To the end arm can be attached one of the parts used to fix the luminaire or other device. The choice is T-holder, Disc holder, and Suspension device with pin, Insert with screw.
The total load capacity of the two-arm assembly is 50 kg
KEY FEATURES
· Solid steel structure
· Modular design of the whole system
· Total load capacity of 50 kg
The base arm is used to attach the system to a wall or a vertical pipe of different diameters. It is possible to attach to the base arm a center and then an end arm, as required by the customer, to form a two-arm assembly.
If necessary, the center arm can be omitted and the end arm can by connected directly to the base arm. So a single-arm assembly is produced.
The center and end arm can be selected in two variants:
250 mm or 350 mm long. By combination of these parts, the suspended device can be offset from the vertical structure in the following lengths: 400 mm, 650 mm, 750 mm
and 850 mm.
To the end arm can be attached one of the parts used to fix the luminaire or other device. The choice is T-holder, Disc holder, and Suspension device with pin, Insert with screw.
The total load capacity of the two-arm assembly is 50 kg
KEY FEATURES
· Solid steel structure
· Modular design of the whole system
· Total load capacity of 50 kg
0130107
|
Disc holder with bolt and nut M20, intended for mounting on both 250 mm and 350 mm arms.
This element is part of the GOLEM II modular carrier and mounting system.
|
42,30EURnet of VAT/pcs | ||
0130108
|
Suspension device with pin, intended for mounting on both 250 mm and 350 mm arms.
This element is part of the GOLEM II modular carrier and mounting system.
|
52,40EURnet of VAT/pcs | ||
0130106
|
Holder with bolt and nut M20, intended for mounting on both 250 mm and 350 mm arms.
This element is part of the GOLEM II modular carrier and mounting system.
|
40,00EURnet of VAT/pcs | ||
0130200
|
Arm Bases for pipe 45 - 50 mm and wall.
This element is part of the GOLEM II modular carrier and mounting system.
Total load capacity of 50 kg.
|
50,00EURnet of VAT/pcs | ||
0130201
|
For pipe 30-43 mm.
This element is part of the GOLEM II modular carrier and mounting system.
Total load capacity of 50 kg.
|
14,40EURnet of VAT/pcs |
![]() |
560 kB | Katalogový list |
![]() |
91 kB | Prohlášení o shodě |
![]() |
549 kB | Product Data Sheet |
![]() |
80 kB | Declaration of Conformity |
Producer:
Art Lighting Production
RELATED COMMODITY
ID: 0130201
14,40 EUR
net of VAT
ID: 0130104
38,00 EUR
net of VAT